Notifier FCPS-24S8 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Sicherheit Notifier FCPS-24S8 herunter. Notifier FCPS-24S8 User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 2
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
dn-6927:a • 04/30/09 — Page 1 of 2
FCPS-24S6(C/E) & FCPS-
24S8(C/E)
6- & 8-Amp 24-Volt
Remote Power Supplies
Power Supplies
dn-6927:a
General
The FCPS-24S6E (6-amp) and FCPS-24S8E (8-amp) are
remote power supplies with battery charger. The FCPS-24S6/-
24S8 may be connected to any 12 or 24 volt fire alarm control
panel (FACP) or may be used as stand-alone supplies. Pri-
mary applications include notification appliance (bell) circuit
(NAC) expansion (to support ADA requirements and NAC syn-
chronization) or auxiliary power to support 24 volt system
accessories. The FCPS-24S6/-24S8 provides regulated and
filtered 24 VDC power to four notification appliance circuits
configured as either four Class B (Style Y) or Class A (Style Z,
with ZNAC-4 option module). Alternately, the four outputs may
be configured as all non-resettable, all resettable or two non-
resettable and two resettable. The FCPS-24S6/-24S8 also
contains a battery charger capable of charging up to 18 AH
batteries. FCPS-24S6C & FCPS-24S8C are ULC-listed.
NOTE: Unless otherwise specified, the terms FCPS-24S6 and
FCPS-24S8 used in this document refers to the standard FCPS-
24S6 and FCPS-24S8, FCPS-24S6C and FCPS-24S8C, the
FCPS-24S6E and FCPS-24S8E
Features
UL-Listed NAC synchronization using System Sensor,
Wheelock, or Gentex “Commander
2
” appliances.
Operates as a “sync-follower” or as a “sync-generator”
(default). See note on page 2.
Contains two fully-isolated input/control circuits - triggered
from FACP NAC (NAC expander mode) or jumped perma-
nently “ON” (stand-alone mode).
Four Class B (Style Y) or four Class A (Style Z, with
ZNAC-4 module) NACs.
6-amp (FCPS-24S6) or 8-amp (FCPS-24S8) full load out-
put, with 3 amps maximum/circuit, in NAC expander mode
(UL 864).
4-amp (FCPS-24S6) or 6-amp (FCPS-24S8) continuous
output in stand-alone mode (UL 1481).
Compatible with coded inputs; signals passed through.
Optional power-supervision relay (EOLR-1).
In stand-alone mode, output power circuits may be config-
ured as: resettable, (reset line from FACP required),
non-resettable, or a mix of two and two.
Fully regulated and filtered power output - optimal for pow-
ering four-wire smoke detectors, annunciators, and other
system peripherals requiring regulated/filtered power.
Power-limiting technology meets UL power-limiting require-
ments.
Form-C normally-closed trouble relay.
Fully supervised power supply, battery, and NACs.
Selectable earth fault detection.
AC trouble report selectable for immediate 2-hour delay.
Works with virtually any UL 864 fire alarm control which uti-
lizes an industry-standard reverse-polarity notification cir-
cuit (including unfiltered and unregulated bell power).
Requires input trigger voltage of 9 - 32 VDC.
Self-contained in compact, locking cabinet - 15”H x 14.5”W
x 2.75”D (cm: 38.1H x 36.83W x 6.985D).
Includes integral battery charger capable of charging up to
18 AH batteries. Cabinet capable of housing 7.0 AH batter-
ies.
Battery charger may be disabled via DIP switch for applica-
tions requiring larger batteries.
Fixed, clamp-type terminal blocks accommodate up to 12
AWG (3.1mm
2
) wire.
Specifications
Primary (AC) Power:
FCPS-24S6C/-24S8C: 120 VAC, 60 Hz, 3.2A maximum.
FCPS-24S6E/-24S8E: 240 VAC, 50 Hz, 1.6A maximum.
Wire Size: minimum #14 AWG (2.0mm
2
) with 600 V insula-
tion.
Control Input Circuit:
Trigger Input Voltage: 9 to 32 VDC.
Trigger Current: 2.0 mA (16 - 32 V); Per Input: 1.0 mA (9
- 16 V).
Trouble Contact Rating: 5 A at 24 VDC.
Auxiliary Power Output: Specific application power 500 mA
maximum.
Output Circuits:
+24 VDC filtered, regulated.
3.0 A maximum for any one circuit.
Total continuous current for all outputs (stand-alone mode):
FCPS-24S6: 4.0 A maximum.
FCPS-24S8: 6.0 A maximum.
Total short-term current for all outputs (NAC expander mode):
FCPS-24S6: 6.0 A maximum.
FCPS-24S8: 8.0 A maximum.
Secondary Power (Battery) Charging Circuit:
Supports lead-acid batteries only.
Float-charge voltage: 27.6 VDC.
6927pho1.jpg
Seitenansicht 0
1 2

Inhaltsverzeichnis

Seite 1 - 24S8(C/E)

dn-6927:a • 04/30/09 — Page 1 of 2FCPS-24S6(C/E) & FCPS-24S8(C/E)6- & 8-Amp 24-VoltRemote Power SuppliesPower Suppliesdn-6927:aGeneralThe FCPS

Seite 2 - Ordering Information

Page 2 of 2 — dn-6927:a • 04/30/09System Sensor® and NOTIFIER® are registered trademarks of HoneywellInternational Inc. ©2009 by Honeywell Internation

Verwandte Modelle: FCPS-24S6

Kommentare zu diesen Handbüchern

Keine Kommentare